Loading article...

Failed to load article. Please try again.

How to Clean Your Boat (Without Using the Water It's Sitting In)

Yes, we see the irony. You're surrounded by water — thousands of gallons of it — and we're here to tell you not to use it to clean your boat. Bear with us, because there's a very good reason. Actually, several.

Why Watercraft Need More Cleaning Attention Than You Think

People assume that because a boat lives on the water, it stays clean. The opposite is true. Watercraft take a beating from every direction:

  • Salt water — corrosive, relentless, and it gets into everything
  • UV exposure — hours on open water means brutal sun on every surface
  • Algae and waterline scum — builds up fast and bonds hard
  • Bird droppings — acidic and damaging if left to sit
  • Fuel and oil residue — especially around the engine and transom
  • Spray and splash residue — mineral deposits from water drying on surfaces

And it's not just boats. Jet skis, pontoons, kayaks, paddleboards, fishing boats, bass boats, center consoles — every watercraft on the water deals with the same punishment. The surfaces might be different, but the problem is the same: constant exposure to elements that degrade, stain, and dull your finish.

So Why Not Just Rinse It Off?

Rinsing helps, but it doesn't clean, protect, or shine. You're just moving water around. And if you're at a marina, a lake ramp, or out on the water, you may not even have access to a fresh water rinse. Salt water on a salt water surface doesn't exactly solve the problem.

That's where Texas 2 Step Ship Shape comes in. Spray it on, wipe it off, and you've cleaned, protected, and shined the surface — all in one pass. No hose. No buckets. No fresh water required. Yo ho ho.

What Ship Shape Works On (Basically Everything)

This is where it gets good. Ship Shape is safe and effective on every surface you'll find on a watercraft:

  • Fiberglass — cleans oxidation, restores shine, leaves a protective layer
  • Plastic and ABS — perfect for jet ski bodies, kayaks, and paddleboards
  • Vinyl — seats, covers, bimini tops, and upholstery come out looking fresh
  • Glass — windscreens and windows streak-free with a single wipe
  • Chrome — cleats, rails, and hardware shine like new
  • Decals and graphics — gentle enough to clean around decals without lifting edges or fading colors
  • Painted surfaces — hull sides and topsides clean and protect in one step

One product. Every surface on your boat. That's the kind of simplicity that makes sense when you're trying to get back on the water instead of spending your whole morning cleaning.

How to Use Ship Shape on Your Watercraft

  1. Start at the top, work down. T-top, console, windscreen first — then seats, gunwales, and hull sides.
  2. Spray Ship Shape directly on the surface. One section at a time — don't try to do the whole boat at once.
  3. Wipe with a clean microfiber in straight lines. The formula lifts dirt, salt residue, and grime without scrubbing.
  4. Buff with a second dry microfiber. Brings out the shine and leaves a protective coating behind.
  5. For stubborn spots — bird droppings, waterline scum, dried salt — spray and let it dwell 30 seconds before wiping.

The whole boat can be done in 20-30 minutes depending on size. And because Ship Shape leaves a protective layer, your next cleaning takes even less time.

The Marina Moment

You know that feeling when you pull up to the marina and the boat next to you is gleaming? That's not luck — that's someone who figured out that a quick wipe-down after every outing keeps a boat looking like it just came off the showroom floor.

Ship Shape fits in your tackle box, your storage compartment, or your dock bag. It's ready when you are — before a trip, after a trip, or right there at the dock when you notice your windscreen is covered in spray residue and you've got guests arriving in 20 minutes.

No hose needed. No fresh water required. Just a clean, shining, protected boat — even when you're surrounded by the wrong kind of water.

All hands on deck — grab Texas 2 Step Ship Shape and keep your watercraft looking shipshape, every time you hit the water. 

Is Waterless Wash Safe for Vinyl Wraps? (Yes, Here's Why)

Vinyl wraps are an investment. Whether you went full color change, added a partial wrap, or protected your paint with a clear wrap, the last thing you want is to damage it with the wrong cleaning product. So when people ask us if Texas 2 Step is safe for vinyl wraps — we get it. It's a fair question.

Short answer: yes. Long answer: it's actually one of the best ways to clean and protect a vinyl wrap. Here's why.

What Makes Vinyl Wraps Different to Clean?

Vinyl wrap isn't paint. It's a film applied over your vehicle's surface, and it has its own set of rules when it comes to care:

  • High-pressure water can lift edges and seams over time
  • Harsh chemicals can degrade the adhesive or cause discoloration
  • Abrasive products or rough cloths can scratch or dull the finish
  • Petroleum-based products can break down the vinyl itself

Traditional car wash soaps and automatic car washes can all cause problems for wraps. Waterless wash, done right, avoids every one of these issues.

Why Waterless Wash Works So Well on Wraps

Texas 2 Step is environment-safe, non-abrasive, and free of harsh chemicals that damage vinyl. Here's what that means in practice:

  • No high-pressure water — zero risk of lifting seams or edges
  • Gentle lubricated formula — lifts dirt without scratching the wrap surface
  • Safe for all wrap finishes — gloss, matte, satin, chrome, and color-shift wraps
  • Protects as it cleans — leaves a protective layer that helps repel dust and UV rays
  • No petroleum, no harsh solvents — won't degrade the vinyl or adhesive

How to Clean a Vinyl Wrap with Texas 2 Step

The process is simple and takes just a few minutes per panel:

  1. Work in the shade. Heat and direct sun can make any product dry too fast on a wrap.
  2. Use clean microfiber towels only. Never use paper towels or rough cloths on a wrap — microfiber is soft enough to protect the surface.
  3. Spray Texas 2 Step on the panel. Light, even coverage across one section at a time.
  4. Wipe gently in straight lines. Let the product lift the dirt — don't apply pressure or scrub.
  5. Buff with a second clean microfiber. This removes any residue and brings out the finish.

For matte or satin wraps, avoid circular motions — always wipe in straight lines to preserve the finish direction.

What About Bird Droppings and Bug Splatter?

These are the enemies of any wrap because the longer they sit, the more they can etch into the surface. Texas 2 Step handles both easily — spray directly on the affected area, let it dwell for 30 seconds, then wipe gently. The formula softens and lifts the contaminant without you having to scrub.

This is where the on-the-go convenience really matters. Keeping Texas 2 Step in your car means you can deal with a bird dropping in a parking lot before it has a chance to cause damage.

How Often Should You Clean a Vinyl Wrap?

More often than you think — and that's actually easy when you're using a waterless wash. A quick wipe-down every week or two keeps contaminants from building up and extends the life of your wrap significantly. The protective layer Texas 2 Step leaves behind also means less dirt sticks between cleanings.

The Bottom Line

If you have a vinyl wrap, waterless wash isn't just safe — it's the smarter choice. No pressure wash risk, no harsh chemicals, no automatic car wash rollers grinding against your wrap. Just a clean, protected finish in minutes, wherever you are.

Keep your wrap looking sharp with Texas 2 Step Wrap Care — specifically formulated for vinyl wraps, paint protection film, and specialty finishes, except matte and satin finishes. 

How to Clean a Motorcycle Without a Hose (The Right Way)

How to Clean a Motorcycle Without a Hose (The Right Way)

Motorcycles are a different animal when it comes to cleaning. You've got chrome, painted surfaces, rubber, leather, powder coat, and a dozen other materials all sitting inches apart. Blast them with a pressure washer and you risk forcing water into bearings, electrical connections, and air intakes. Use the wrong soap and you dull your chrome or streak your paint.

Waterless wash solves all of that. Here's how to get your bike looking showroom-clean without a hose, a bucket, or a single drop of water.

Why Waterless Wash Is Perfect for Motorcycles

Think about what a traditional wash does to a motorcycle. Water gets into places it shouldn't — around controls, into electrical connectors, under fairings. Even a garden hose at low pressure can push water into spots that take hours to dry out completely.

Waterless wash eliminates that risk entirely. You're working panel by panel with a spray and a microfiber — controlled, precise, and completely water-free. It's also fast enough that you can detail your bike in a parking lot before a show without breaking a sweat.

What You'll Need

  • Texas 2 Step Motorcycle Care
  • 3-4 clean microfiber towels (more is better — use a fresh one when one gets dirty)
  • A soft detailing brush for tight spots (optional but helpful)

Step-by-Step: How to Wash Your Motorcycle Without Water

  1. Let the engine cool completely. Never apply any product to a hot engine or exhaust. Give it at least 30 minutes after riding.
  2. Start at the top, work down. Begin with the tank, then fairings, then lower panels. Gravity is your friend — any drips fall onto areas you haven't cleaned yet.
  3. Spray Texas 2 Step on one section at a time. Don't try to do the whole bike at once. Work in manageable sections — tank, left fairing, right fairing, fenders, etc.
  4. Wipe in straight lines with a clean microfiber. Let the formula lift the dirt. Light pressure is all you need — don't scrub.
  5. Flip or switch to a clean towel often. A dirty towel just moves grime around. Keep rotating to a clean section or grab a fresh towel.
  6. Buff with a second dry microfiber. Follow up each section with a quick buff to bring out the shine and eliminate any streaks.
  7. For chrome and metal surfaces — same process. Texas 2 Step works beautifully on chrome pipes, wheels, and engine covers, leaving them gleaming without water spots.
  8. For tight spots — use a soft detailing brush to work the product into fins, vents, and around controls before wiping.

What About Bug Splatter and Road Grime?

Bugs on a fairing or windscreen are one of the most common complaints from riders. Texas 2 Step handles them well — spray directly on the affected area, let it sit for about 30 seconds to soften the splatter, then wipe gently. For really stubborn bugs, a second application does the trick.

Road grime on lower panels and wheels responds the same way. The formula encapsulates the dirt and lifts it off without you having to scrub hard enough to risk scratching.

Keeping It Clean Between Rides

One of the best habits you can build as a rider is a quick wipe-down after every ride. It takes five minutes, keeps contaminants from bonding to your surfaces, and means your bike always looks like it just came out of a detail shop.

Texas 2 Step fits in a saddlebag, a tank bag, or a jacket pocket. There's no excuse not to have it with you. Spray, wipe, done — whether you're at home, at a rally, or in a hotel parking lot after a long day on the road.

Show Day Ready, Any Day

If you ride to shows, you know the feeling of pulling up and wishing you'd had time to clean the bike before you got there. With waterless wash, that's never a problem. Pull into the parking lot 15 minutes early, do a quick pass with Texas 2 Step, and roll in looking like you just came off a trailer.

Ready to keep your bike looking its best on the road and at the show? Grab Texas 2 Step Motorcycle Care and see why riders across the country trust it for their bikes.

How to Wash Your Car Without Water (And Why It's Better)

Let's be honest — nobody loves dragging out the hose, filling up buckets, and spending an hour washing their car only to watch it get dusty again on the drive home. There's a better way, and once you try it, you won't go back.

Waterless car washing has been around for a while, but a lot of people still aren't sure how it works or whether it's actually safe for their paint. Spoiler: when you use the right product, it's not just safe — it's better than a traditional wash in a lot of ways.

What Is Waterless Car Washing?

Waterless car wash is exactly what it sounds like — a spray-on solution that lifts dirt, dust, and grime off your vehicle's surface without needing any water at all. You spray it on, wipe it off, and you're done. Clean car, protected finish, no hose required.

Texas 2 Step Waterless Wash & Wax takes it a step further by cleaning and protecting your paint in one single step. You're not just washing — you're laying down a protective wax coating at the same time. One swipe, two results.

Is It Safe for My Paint?

This is the question we get most. Yes — as long as you're using a quality waterless wash with the right formula. The key is lubrication. A good waterless wash encapsulates dirt particles and lifts them off the surface so they don't scratch your clear coat when you wipe.

Texas 2 Step is environment-safe and gentle enough for all paint types, including clear coats, single-stage paint, and even matte finishes. It's the kind of product you can use confidently on a show car or a daily driver.

How to Do It Right — Step by Step

Here's the simple process that takes most people under 15 minutes for a full car:

  1. Work in the shade. Direct sunlight can cause the product to dry too fast before you wipe. Find a shaded spot or work early morning/evening.
  2. Grab two microfiber towels. One for the initial wipe, one for the final buff. Microfiber is key — it's what makes this process scratch-free.
  3. Spray Texas 2 Step directly on the panel. A light, even coat across one section at a time — hood, roof, door, etc.
  4. Wipe in straight lines. Use your first microfiber to wipe off the product and lift the dirt. Don't scrub — let the formula do the work.
  5. Buff with the second towel. A quick pass with a clean, dry microfiber brings out the shine and removes any streaks.
  6. Move to the next panel and repeat. That's it.

When Is Waterless Washing the Best Option?

Honestly? Most of the time. Here are the situations where it really shines:

  • Light to moderate dust and dirt — perfect for everyday maintenance between deeper washes
  • On the go — at a car show, in a parking lot, at an event, or anywhere you don't have access to a hose
  • Apartments and condos — no outdoor water access? No problem
  • Water restrictions — drought conditions or HOA rules that limit outdoor water use
  • Quick touch-ups — bird droppings, fingerprints, pollen — spot clean in seconds

What About Heavy Mud or Caked-On Dirt?

If your vehicle is caked in heavy mud from an off-road adventure, a traditional rinse first makes sense. Waterless wash is designed for regular maintenance — not for removing an inch of dried mud. But for 90% of everyday driving situations, it handles everything you throw at it.

The Convenience Factor Is Real

Think about how often you actually wash your car versus how often it needs it. Most people wash less frequently than they should because it's a hassle. When washing takes 15 minutes and fits in your glove box, you do it more often — and your car looks better for it.

Texas 2 Step fits in a gym bag, a saddlebag, a boat compartment, or a trunk. It's ready whenever you are, wherever you are.

Ready to ditch the hose? Grab your Texas 2 Step Auto Care and see what a waterless wash can do for your ride.

How to Keep Your Kayak Clean (And Why It Matters More Than You Think)

Kayaks look tough. They take a beating on the water, get dragged across ramps, strapped to roof racks, and left in the sun for hours. Most paddlers figure a quick rinse is all they need. But if you want your kayak to last, perform well, and look good doing it, a little more care goes a long way.

Here's why regular cleaning matters — and how to do it right without harming your kayak or the waterways you love.

Why Cleaning Your Kayak Is About More Than Looks

A dirty kayak isn't just an eyesore. Here's what's actually happening when you skip the cleanup:

  • Mold and mildew build up fast — especially in cockpits, hatches, and any area that stays damp. Left unchecked, mold degrades foam padding, fabric, and even the hull material over time.
  • UV rays break down your hull — prolonged sun exposure causes plastic and composite hulls to fade, become brittle, and lose structural integrity. A clean, protected surface resists UV damage significantly better than a bare, dirty one.
  • Algae, mud, and aquatic hitchhikers — invasive species travel between waterways on dirty gear. Cleaning your kayak between launches isn't just good practice — in many states it's required by law. Clean, drain, dry is the standard.
  • Grime degrades performance — buildup on the hull creates drag. A clean hull moves through the water more efficiently, which matters whether you're fishing, racing, or just paddling for fun.

What Not to Use on Your Kayak

This is where a lot of paddlers go wrong. Harsh chemicals — bleach, ammonia-based cleaners, petroleum solvents, and abrasive scrubs — can damage your kayak's material and harm local waterways when they rinse off at the launch. Polyethylene, fiberglass, and composite hulls are all vulnerable to chemical degradation over time.

The rule of thumb: if you wouldn't want it washing into the lake or river, don't use it on your kayak at the water's edge.

Ship Shape: The Smarter Way to Clean Your Kayak

Texas 2 Step Ship Shape was built for watercraft, and kayaks are no exception. It's environment-safe, free of harsh solvents, and works on every surface you'll find on a kayak:

  • Polyethylene and plastic hulls — the most common kayak material, and Ship Shape cleans and protects it without drying it out or causing surface degradation
  • Fiberglass and composite — restores shine and adds a protective layer that resists UV and water spotting
  • Vinyl seats and padding — cleans without cracking or drying out the material
  • Glass and acrylic — cockpit covers and hatches come out streak-free
  • Decals and graphics — gentle enough to clean around tournament decals, sponsor logos, and registration stickers without lifting edges
  • Aluminum and chrome hardware — handles, rudder hardware, and rod holders shine up easily

How to Clean Your Kayak with Ship Shape

  1. After every paddle, give it a quick wipe-down. Spray Ship Shape on the hull and cockpit, wipe with a clean microfiber, and buff dry. Five minutes, done.
  2. For deeper cleaning, work section by section — hull, cockpit, deck, hatches. Spray, wipe in straight lines, buff with a second microfiber.
  3. For stubborn algae or waterline scum, spray and let Ship Shape dwell for 30 seconds before wiping. It softens the buildup so you don't have to scrub hard.
  4. Don't forget the cockpit and hatches. These are the spots most prone to mold. A regular wipe-down keeps moisture and organic buildup from taking hold.

Trusted by Kayak Bass League Anglers

Serious kayak anglers know that gear maintenance is part of the game. Texas 2 Step Ship Shape is trusted by Kayak Bass League competitors who need their boats clean, protected, and ready to perform — tournament after tournament, launch after launch.

When you're fishing competitively, you don't have time for a full wash setup at every ramp. Ship Shape fits in your crate, your hatch, or your tackle bag. Spray it on, wipe it off, and get on the water.

Keep It Ship Shape, Every Launch

Your kayak takes you places. A little regular care keeps it performing well, looking great, and lasting for years — while making sure you're not the one spreading invasive species between waterways.

Clean hull. Protected finish. Happy paddler. That's the Texas 2 Step way.

Grab Texas 2 Step Ship Shape and keep your kayak in top condition — on the water and off it.

Texas 2 Step Rolls Into Myrtle Beach Bike Week

Texas 2 Step Rolls Into Myrtle Beach Bike Week

We're bringing Texas 2 Step to Myrtle Beach Bike Week!

  • When: May 8–17, 2026

  • Where: Rally on the Strand, Barefoot Landing, Myrtle Beach

  • What: Live demos of waterless "spray, wipe, and roll" cleaning method

  • Special Pricing: $10 kits and $20 32oz bottles (event-exclusive pricing)

  • Why it matters: 30-second bike detailing with 45-day carnauba wax protection, no water needed

What Is Texas 2 Step Doing at Myrtle Beach Bike Week?

We're excited to announce that Texas 2 Step will be at Rally on the Strand at Barefoot Landing from May 8–17, 2026. If you've ever struggled with cleaning your bike on the road or wondered if there's a faster way to get that showroom shine, we're here to show you exactly how our waterless cleaning system works in real life.

Myrtle Beach Bike Week has been a cornerstone of the motorcycle community since 1940. Today, it's one of the largest rallies on the East Coast, drawing over 300,000 riders annually. These aren't casual tourists - they're riders who live and breathe the culture, and who treat their bikes like works of art.

Why we chose this rally: This event puts us face-to-face with cruiser enthusiasts—especially Harley-Davidson riders—who understand that chrome and paint aren't just finishes, they're statements. If you're riding a bike that turns heads, you know what we're talking about.

Our booth at Barefoot Landing puts us right in the heart of the action, close to major Harley-Davidson dealerships where thousands of riders congregate daily. But here's the thing—spending 10 days on the coast takes a toll on your bike. We've seen it firsthand, and so have you:

  • Dust from coastal roads

  • Bug splatter from highway riding

  • Salt air corrosion

  • Humidity damage to finishes

This is where Texas 2 Step changes the game. No searching for a hose. No lugging buckets around. Just spray, wipe, and you're ready to roll. Imagine being able to detail your entire bike in a parking lot before heading to the next hot spot—that's the freedom we're offering.

Our philosophy: Waterless cleaning built for the road, designed for riders who refuse to waste precious rally time hunched over a bucket.

What Happens During Our Live Demos

We'll be running live demonstrations all week long, and here's exactly what you'll see when you stop by our booth:

Step 1: The Mist 

First, we spray a light, even mist of Texas 2 Step over a dirty section of a bike. You'll immediately see the organic formula start working—it encapsulates the dirt and lifts it off the surface. And because our formula is organic, you won't get that harsh chemical smell that makes your eyes water.

Step 2: The One-Way Wipe

Next comes the satisfying part: we take a plush microfiber towel and make one smooth, single-direction pass. No aggressive scrubbing. No circular buffing. You'll literally watch the grime transfer from the bike to the towel in one clean swipe.

Step 3: The Flip and Buff

We flip the towel to a fresh, dry side and give it a quick buff. Within seconds, you're looking at a wet-look shine that makes chrome look like a mirror and brings out the deep, rich color in paint. It's the kind of finish that stops people mid-walk.

Step 4: The Water Test (Proof of Protection)

Here's where jaws drop: we pour water directly onto the treated surface. Instead of pooling or streaking, the water beads up and rolls right off—like it's afraid to touch the bike. That's the 45-day carnauba wax barrier doing its job, protecting against rain, dirt, and coastal salt spray.

Step 5: The Touch Test

Finally, we invite you to run your hand across the treated area. It feels almost impossibly slick—like touching silk or glass. Most riders compare it to the untreated side and immediately understand the difference. 

Texas 2 Step gets you show-ready results in 30 seconds per section. That's not an exaggeration—that's what our customers tell us at every event.

 

Special Rally Pricing (Only at Our Booth)

We're offering exclusive event pricing for Myrtle Beach Bike Week attendees. These prices won't be available online or anywhere else:

  • Kits: $10

  • 32oz bottles: $20

This pricing is only valid at our Barefoot Landing booth between May 8–17, 2026. 

Think about it this way: Every hour you spend cleaning is an hour you're not riding. At a 10-day rally, that time adds up fast. We're giving you those hours back.

Where to Find Us During the Rally

Look for the Texas 2 Step booth at Barefoot Landing throughout Rally on the Strand. Whether you're on a Harley, Indian, Victory, or any other ride, you're welcome to stop by. Here's what we invite you to do:

  • Watch live demonstrations

  • Feel the difference on treated surfaces

  • Ask questions about the organic, non-toxic formula

  • Learn how aircraft-grade cleaning technology works on motorcycles

We'll be there every day of the rally, ready to answer your questions and show you why waterless cleaning isn't a gimmick—it's a complete shift in how you maintain your bike on the road.

See you at Barefoot Landing. Ride hard. Live free. Let's make your bike shine.

 

Frequently Asked Questions About Texas2Step

What is Texas2Step?

Texas 2 Step is an organic, waterless motorcycle cleaner and wax that works in a single step. We originally formulated it for aircraft detailing, which means it had to meet extremely high standards for safety and effectiveness. The "spray, wipe, and roll" method eliminates the need for hoses, buckets, or spending hours in your driveway. It's designed for riders who want professional results without the professional time investment.

Why is waterless cleaning better for motorcycle rallies?

Traditional washing requires access to a water source, drainage, and space to work. At a rally, you're often staying in hotels, campgrounds, or parking lots where those things aren't available. Waterless cleaning means you can detail your bike anywhere—before a group ride, in a parking lot before hitting a popular spot, or right at your campsite. For multi-day events like Myrtle Beach Bike Week, that flexibility is game-changing.

How long does the protective coating last?

Our carnauba wax barrier provides 45 days of protection against dirt, water, salt air, and UV damage. This is especially important in coastal environments like Myrtle Beach, where salt spray and humidity can quickly corrode chrome and dull paint. One application at the start of the rally will protect your bike through the entire event and well beyond.

Does Texas 2 Step work on all motorcycle finishes?

Yes. Texas 2 Step is safe for chrome, painted surfaces, clear coats, windshields, and even leather and glass. Our formula uses protective lubricants that encapsulate dirt particles, preventing them from scratching your finish during the cleaning process. We've tested it on everything from classic Harleys to modern sport bikes with zero issues.

How long does it take to clean a motorcycle with Texas 2 Step?

Each section takes roughly 30 seconds: spray, wipe, buff, done. For a full motorcycle detail—tank, fenders, chrome, windshield—most riders finish in 10–15 minutes. Compare that to traditional washing (rinsing, soaping, rinsing again, drying, waxing, buffing) which typically takes 2–3 hours. The time savings alone make it worth trying.

Is the formula safe for the environment?

Absolutely. Texas 2 Step uses an organic, non-toxic formula with no harsh chemicals or solvents. Because it's waterless, there's no runoff carrying oils, chemicals, or dirt into storm drains or local waterways. You're getting a cleaner bike while being a better steward of the environment—especially important when you're cleaning near beaches, rivers, or protected coastal areas.

What makes Myrtle Beach Bike Week ideal for Texas 2 Step?

Three main reasons:

1) the event draws over 300,000 riders, predominantly cruiser and Harley-Davidson enthusiasts who deeply value their bike's appearance. 

2) the coastal location creates real cleaning challenges—salt air, humidity, bugs, and road grime—that Texas2Step was built to handle. 

3) it's a 10-day event, which means riders need quick, effective solutions to keep their bikes looking sharp between rides, group meetups, and photo ops. It's the perfect testing ground for our product.

Can I buy Texas 2 Step online if I can't attend the rally?

Yes, Texas 2 Step is available for purchase year-round at texas2step.com. However, the special rally pricing—$10 kits and $20 32oz bottles—is exclusive to attendees who visit our booth at Barefoot Landing during Myrtle Beach Bike Week, May 8–17, 2026. These prices won't be available online before, during, or after the event.

Texas 2 Step is a Vendor at the 87th Spring Rally – Bike Week in Myrtle Beach, SC!

Texas 2 Step is a Vendor at the 87th Spring Rally – Bike Week in Myrtle Beach, SC!

Come Find Us at the 87th Spring Rally – Bike Week in Myrtle Beach, SC!

We're excited to announce that Texas 2 Step Waterless Wash & Wax will be a vendor at the 87th Spring Rally – Bike Week in Myrtle Beach, South Carolina!

📅 Dates: May 8–17, 2026
📍 Location: 4640 Hwy 17 S, North Myrtle Beach, SC 29582

Stop by our booth and see first hand why Texas 2 Step is the go-to waterless wash and wax for bikes, cars, boats, and more. Whether you're rolling in on two wheels or four, we'd love to meet you and show you what our product can do!

Pick up your favorite Texas 2 Step products, get a live demo, and hit the road with a shine that turns heads. We'll see you there! 🏍️✨

Understanding the Upcoming Price Update

For years, Texas 2 Step has proudly kept our product prices steady, even while the costs of materials, production, and shipping have continued to rise. We’ve worked hard to stay below market value for as long as possible so our customers could continue enjoying high-quality, environmentally friendly products at the best possible price.

After careful review and consideration, we will be updating the price of our 32oz bottles from $16.99 to $24.99, effective January 1, 2026.

This adjustment is necessary for us to continue offering the same premium quality you’ve come to trust. We value our customers deeply and want you to know that we held our pricing steady for years to support affordability. Updating our pricing now allows us to keep up with rising costs, maintain consistent product quality, and continue growing as a woman-owned, family-driven business.

We appreciate your understanding and continued support.
Thank you for being part of the Texas 2 Step family.

Honoring our Peace Officers

In 1962, President Kennedy proclaimed May 15 as National Peace Officers Memorial Day and the calendar week in which May 15 falls, as National Police Week. Established by a joint resolution of Congress in 1962, National Police Week pays special recognition to those law enforcement officers who have lost their lives in the line of duty for the safety and protection of others.

Texas2Step would like to take a moment to honor and remember those who have made the ultimate sacrifice defending our cities and to also thank those who continue to keep us safe every day.

To show our support for our officers, we are offering everyone the use of a promotional code for no shipping cost on any purchases over $25.00.

Use Promotional Code: BLUE

Promotion will be going until the end of May.

CKA Carolina ShootOut Sponsored By Texas2Step

Carolina Kayak Anglers is proud to present the “Carolina Shootout” sponsored by Texas 2 Step! The Carolina ShootOut is a month-long on-line kayak bass fishing tournament for kayak anglers fishing N.C. and S.C. waters in February, 2020. For details and TourneyX Sign Up: https://tourneyx.com/app/tourney/carolina-shootout-presented-by-texas-2-step

Dallas Harley & Harley of Dallas

Yes that is correct pilgrim, Dallas Harley has been carrying Texas 2 Step for a long time & loves it. They use T2S to clean the showroom bikes & client bikes when done servicing. Go look at the new great Harleys they have and take one for a spin! Then buy it!

Texas 2 Step hits the East Coast!

Yes that's right, Two Step has been cleaning up the South and making it way up the coast. With so many options, and so many chemicals out there, eating away clear coats, drying out moldings and soaking into your skin. You don't get that with Texas Two Step... All Organic Chemical Free.....